山東百華鞋業有限公司

走進百華

聯系我們

您現在的位置:首頁公司新聞 > The Declaration of Conformity

字號:   

The Declaration of Conformity

作者:山東百華鞋業來源:山東百華鞋業 瀏覽次數: 日期:2018年3月1日 17:38

摘要:

The Declaration of Conformity can be downloaded at http://www.bcpewd.icu/

This safety footwear complies with the EC Directive for Personal Protective Equipment (Directive 89/686/EEC) and meets the requirements of the European standard EN ISO 20345:2011.  It is certified by ITS Testing Services UK Ltd, Centre Court, Meridian Business Park, Leicester, LE19 1WD, Notified Body no 0362.

 

Safety Footwear is manufactured using both synthetic and natural materials which conform to the relevant sections of EN ISO 20345:2011 for performance and quality.

 

Safety Footwear is designed to minimise the risk of injury which could be inflicted by the wearer during use. It is designed to be used in conjunction with a safe working environment  and will not  completely prevent injury if an accident occurs which exceeds the testing limits of EN ISO 20345:2011

 

The footwear protects the wearer’s toes against risk of injury from falling objects and crushing when worn in industrial and commercial environments where potential hazards occur with the following protection plus, where applicable, additional protection.

 

Impact protection provided is 200 Joules.

Compression protection provided is 15,000 Newton’s.

 

Additional protection may be provided, and is identified on the product by it marking as follows

 

                                                                                         Marking code

Penetration resistance (1100 Newton’s)

P

Electrical properties:

Conductive (Max 100 kW)

C

Antistatic (Range of 100 kW to 1000 MW)

A

          Electrically insulating footwear

I

Resistance to inimical environments:

Insulation against heat

HI

Insulation against cold

CI

Energy absorption of seat region (20 Joules)

E

Water resistance

WR

Metatarsal protection

M

Ankle protection

AN

          Cut resistant upper

CR

Upper

 

          Water penetration and water absorption

WRU

Outsole

 

         Resistance to hot contact

HRO

         Resistance to fuel oil

FO

 

 

It is important that the footwear selected for wear must be suitable for the protection required and wear environment.

Where a wear environment is not known, it is very important that consultation is carried out between the seller and the purchaser to ensure, where possible, the correct footwear is provided.

 

To ensure the best service and wear from footwear, it is important that the footwear is regularly cleaned and treated with a good proprietary cleaning product.  Do not use any caustic cleaning agents.  Where footwear is subjected to wet conditions, it shall, after use, be allowed to dry naturally in a cool, dry area and not be force dried as this can cause deterioration of the upper material. When stored on normal conditions (temperature, and relative humidity), the obsolescence date of a footwear is  generally:

10 years after the date of manufacturing for shoes with upper leather and rubber sole

3 years after the date of manufacturing for shoes including PU”

 

 

· This footwear has been successfully tested against EN ISO 20345:2011 clause 5.3.5 for slip resistance and the following marking symbols apply.

 

Marking of product for slip resistance properties

Marking code

Ceramic tile with sodium lauryl sulphate

SRA

Steel with glycerol

SRB

Ceramic tile with sodium lauryl sulphate &

Steel with glycerol

SRC

*Note: Slippage may still occur in certain environments.

 

· Electrically-resistant footwear is supplied with an Information Notice as required by EN ISO 20345:2011 outlining the purpose, use of footwear, requirement for regular testing when in use, to ensure footwear stays within specific resistance levels.  Footwear shall be kept clean and free from contamination between the sole surface and flooring to retain satisfactory contact.  The flooring shall be of an electrically-resistant level to ensure the footwear can dissipate static electricity to earth.

 

If the footwear is cared for and worn in the correct working environment and stored in dry ventilated conditions, it should give a good wear life, without premature failure of the outsole, upper and upper stitching.  The actual wear life for footwear is dependent on the type of footwear, environmental conditions which can affect the wear, contamination and degradation of the product.

 

 

 

 

 

 

 

 

 

 

Marking on footwear denotes that the footwear is licensed according to the PPE Directive and is as follows:

 

Examples of markings

Explanation

Firm

Identification Mark

CE

CE mark

EN ISO 20345:2011

Number of European standard

9 (43)

Footwear size

05/2008

Quarter and year of manufacture

SB

Category of protection

A

Additional property code, e.g. Antistatic

GR1

Group Identification

 

Categories of safety footwear:

Category

Type (*I) and (**II)

Additional Requirement

SB

I

II

Safety basic requirements

S1

I

 

Closed seat region

Antistatic properties

Energy absorption at the seat region

Resistance to fuel oil

S2

I

 

As S1 plus

Water penetration and absorption of the upper

S3

I

 

As S2 plus

Penetration resistance

Cleated outsole

S4

 

II

Closed seat region

Antistatic properties

Energy absorption at the seat region

Resistance to fuel oil

S5

 

II

As S4 plus

Penetration resistance

Cleated outsole

*Type I footwear is made from leather and other materials excluding all-rubber or all-polymeric footwear

** Type II All –rubber (i.e. entirely vulcanized) or all-polymeric (i.e. entirely moulded) footwear

SBH

Hybrid footwear

 

 

 

If the footwear becomes damaged, it will not continue to give the specified level of protection and to ensure that the wearer continues to receive the maximum protection, the footwear should immediately be replaced.

 

The packaging provided with the footwear at the point of sale is to ensure that the footwear is delivered to the customer in the same condition as when dispatched; the carton can also be used for storing the footwear when not in wear.  When the boxed footwear is in storage, it should not have heavy objects placed on top of it, as this could cause breakdown of its packaging and possible damage to the footwear.

 

The footwear is supplied with a removable insock. Please note the testing was carried out with the insock in place. The footwear shall only be used with the insock in place. The insock shall only be replaced by a comparable insock.

Antistatic footwear

 

 

Antistatic footwear should be used if it is necessary to minimize electrostatic build-up by dissipating electrostatic charges, thus avoiding the risk of spark ignition of, for example flammable substances and vapours, and if risk of electric shock from any electrical apparatus or live parts has not been completely eliminated. It should be noted, however, that antistatic footwear cannot guarantee an adequate protection against electric shock as it introduces only a resistance between foot and floor. If the risk of electric shock has not been completely eliminated, additional measures to avoid this risk are essential. Such measures, as well as the additional tests mentioned below should be a routine part of the accident prevention programme of the workplace.

 

Experience has shown that, for antistatic purpose, the discharge path through a product should normally have an electrical resistance of less than 1000 MW at any time throughout its useful life. A value of 100 kW is specified as the lowest limit of resistance of a product when new, in order to ensure some limited protection against dangerous electric shock or ignition in the event of any electrical apparatus becoming defective when operating at voltages up to 250 V. However, under certain conditions, users should be aware that the footwear might give inadequate protection and additional provisions to protect the wearer should be taken at all times.

 

The electrical resistance of this type of footwear can be changed significantly by flexing, contamination or moisture. This footwear will not perform its intended function if worn in wet conditions. It is, therefore, necessary to ensure that the product is capable of fulfilling its designed function of dissipating electrostatic charges and also of giving some protection during its whole life. The user is recommended to establish an in-house test for electrical resistance and use it at regular and frequent intervals.

             

Classification I footwear can absorb moisture if worn for prolonged periods and in moist and wet conditions can become conductive.

 

If the footwear is worn in conditions where the soling material becomes contaminated, wearers should always check the electrical properties of the footwear before entering a hazard area.

 

Where antistatic footwear is in use, the resistance of the flooring should be such that it does not invalidate the protection provided by the footwear.

 

In use, no insulating elements, with the exception of normal hose, should be introduced between the inner sole of the footwear and the foot of the wearer. If any insert is put between the inner sole and the foot, the combination footwear/insert should be checked for its electrical properties.

 

Shandong Best Serve Safety Shoe Co., Ltd., a professional manufacturer of safety shoes, is located in Shandong Province, enjoying convenient transportation. The company has more than 880 people including 68 technicians, 9 production lines (including 4 PU/PU production lines, 2 PU/TPU production lines, 1 PU/RB production line, 1 cold bonding production line and 1 Goodyear production line), a subsidiary in Jiahua and a monthly productivity of more than 300,000 shoes. The company passed the certification of ISO9001 Quality Management System. The products passed the certifications of European ISO EN20345:2004 Standard, Australia AS/NZS2210.3: 2000 Standard and CAS Standard (Canada and U.S.A). The company has obtained more than 20 standard certificates and enjoys stronger R&D strength.

 

With the corporate values of “Sincere Cooperation, Customer Satisfaction, Profession and Efficiency, Innovation Quality”, the company focuses on the development of personal protection. It strives to provide safety guarantee for your each step.

 

The Declaration of Conformity can be downloaded at http://www.bcpewd.icu/

所屬類別: 公司新聞

該資訊的關鍵詞為:The Declaration of Conformity 

梦幻天上抓律法赚钱吗